Belt Sanders: The "Bulldozer" Tool

How It Works

All About Size

Dealing with Dust

Speed and Slippage

Grit: Coarse or Fine?

Belt Maintenance

A belt sander looks--and acts--like the bulldozer of the toolbox. Applied to a piece of wood, the tool's continuous band of sandpaper tears effortlessly through layers of old paint or patches of rough wood to reveal a fresh surface underneath. Used carefully, belt sanders can make quick work of stock that would otherwise have to be laboriously sanded by hand. But like a grinder, the belt sander has a relentless fury. If held in one place even an instant too long, it will make irreparable gouges in the very surface you're trying to smooth.

All About Size
Sanding belts typically range from 3 inches wide by 18 to 21 inches in circumference to 4 inches by 24 inches for large models. Smaller belt sanders have also begun to appear on the market. Some feature belts just over 1 inch wide, with a front roller that's smaller than the rear roller. This narrows the point of the belt, making it easier to control and maneuver into hard-to-reach areas, such as the gaps between railing posts on an outdoor deck. Despite the tame appearance of these smaller tools, they're still wild at heart and can easily damage wood if you don't keep them in motion.

Dealing with Dust
Belt sanders generate a lot of dust--which is a health hazard, especially when you're sanding pressure-treated wood or wood whose surface contains lead-based paint. Dust bags attached to the tools help to gather up the sawdust and reduce the amount that floats in the air or clogs up the grit on the sanding belt. The highest-quality belt sanders can be hooked up directly to shop vacuums, which suck away all the dust. This system keeps the belt cleaner, and you'll get more mileage out of it as a result. (See our guide on dust collectors.)

Speed and Slippage
Some sanders are equipped with variable-speed controls. Although professionals may not need this capability, homeowners may find it a plus because it will help them slow things down until they develop good control of the tool. The belts themselves have a tendency to wander slightly off the rollers, so you may need to reposition them occasionally. Some have a tracking knob that you can turn to slide the belt back into place; others have tracking devices that do this automatically.

Grit: Coarse or Fine?
All sanding belts contain grit in varying degrees of coarseness that are attached by resin to a cloth or paper surface. They range from 24 grit--the coarsest--to a fine 320. The belts themselves can be made of paper, but paper tears more easily and has a shorter life span than cloth-based alternatives.

The grit used in the most economical belts is made from aluminum oxide; these belts are good for all-purpose wood sanding. Belts covered with grit made from ceramic aluminum oxide don't wear out as quickly--but not surprisingly, they cost more. In addition, belts come in two varieties of grit--closed-coat and open-coat. The grit of closed-coat belts is compacted tightly in the resin, which is good for use on metal or on hardwoods that don't tend to produce gummy dust. On open-coat belts, the grit is spaced out to cut down on clogging. Choose open-coat belts if you're sanding resinous softwoods such as pine, or woods that have painted surfaces. See all belt sanders

Belt Maintenance
No matter what the grit, you can extend the life span of a belt by cleaning it occasionally. Just set it on its side and spin it against a neoprine rubber cleaning block or the rubber sole of a castoff tennis shoe. This removes any dust or grime clogged between the grit particles. To further prolong the life of a belt, don't press down hard on the sander when using it; it will simply add a strain on the machine and the sanding belt. And before sanding anything, check for nails: nothing tears a belt faster than hitting a nail or a screw.

Curtis Rist, a writer for This Old House magazine, parks his power tool collection in New York's Hudson River Valley.

Article courtesy of Amazon.com.